Neuspotter WIP 4

Sorry for lack of updates!
This week my progress has been very slow as I've been sleeping early putting my kid to bed (I usually fall asleep in the process)
Primed and checked some parts...
Now important tips, when doing anything with the Neuspotter head (Oskar,Krachenvogel,Gans),
Sand, prime and check the two halves first before adding the details! Don't be like me, add in all the details then prime and found that the main seamline is not clean (see the second picture, seamline in the triangle) Gotta think of some way to clean that up...


Next, the wires for the bulb. From the instructions, they were supposed to go thru the 2 holes behind and down the main pipe. But from the original picture and design, it went thru the smaller tube in front.

I decided not to light the kit up cos its too cheesy and after researching on the internet and books, decided to plug the wires into the pipe as per original design. I enlarged the hole in the smaller cylinder in front (where my thumb is). I will close the two holes in the back with some spares.

The decision not to light up the kit made it easy for me to glue the bottom 'memory unit' shut and epoxy a wire to hold the kit. No need to build the battery holder in the bottom.


This should not be visible when my vignette is done.
Onto the arms...These are sanding nightmare as the parts had alot of mold circles in places where there are details and the fitting is terrible...



Almost finished building this kit.. Hope to paint it soon!

Neuspotter WIP 3

Sorry for the lack of updates again, been overtiming at work (is there such a word?) and of course, tons of housework before I can even do my models. Anyways after a couple more hours on the AG pods, they are almost done and I've added the main spine to the kit. Primed to check for problem areas and sure enough, there are many spots to clean up.
The wires for the sensor light bulb caused me to be stuck for a while as Sensei Kow's build (and picture) shows the wires going thru the smaller pipe instead of the main pipe, BUT in the kit instructions, they go down thru the main pipe and thru the back, the smaller 'pipe' is a solid piece of rod. Let me think about how to proceed...

Sleepy man...

Shipment 17

Hi guys shipment 17 is finally in... sorry for the huge delay, was waiting for all the stuff to be accounted for before shipping it back from Japan.
Expect a PM from me very soon in 1-2 days time for your stuff!

Ashley does quick work on the newspaper packing...

Acting cute again...

Unnatural smile...She can't really pose for the camera...

Krachenvogel, Jerry, Cobra figure, 1/35 Falke and 1/20 Scout Flier.

Mostly requests, and taken up except the Jerry.

The 'me' post

Finally this is me, William Chin Wei Lian, my beautiful wife Polly Chin (whom I finally won over after repeated failed attempts for 8 years), and our cutest kid Ashley Chin. Photo taken tonight of my refrigerator. Now you guys know how I look like! :) Handsome? lol

Book Review : Ma.K Profile Book #2 : Snake Eye

I just got it! Pardon the lousy pictures, its midnight and the best I can do right now. Soft cover, 64 pages, written in Japanese (good to get a Japanese fren or go learn Japanese!)

Contents (page number)
Ma.K BD 1
Contents 5
Ma.K in Action Act.02 6
Modeling File 14
How to build Ma.K 16
Camouflage & Markings 26
Flashback Model Graphix 1999-2008 30
Kow's lotta models 38
Kow's artworks 58
TAMACAN's atelier visit 63
Original decal 64

Cover Sleeve & Ma.K BD

Ma.K in Action Act.02

Modeling File & How to build Ma.K (Here Sensei explains how to model the split suit!)

Camouflage & Markings, Flashback

Evolution of Snake Eye and Female Model

Kow's lotta models, also featuring Spitfire

Figure Set A featuring Lin.K and Neechmonkey (Lincoln and Travis)

Artwork & Decal

Back Cover

Should you get it? If you are a Snake Eye lover, or just bought the WAVE Snake Eye, just go buy it! I know I want, especially with one of the decals being a cool quote from the Bible!
It will grow on you even if you are not a Snake Eye fan.
Enjoy!

Neuspotter WIP 2

Tiny bit of progress today...
Mostly sanding and fixing problematic parts, like the two thruster bells...
After 1hr of sanding the two halves of the thrusters (khaki ones on the left), I decided to use the new WAVE Snake Eye's (off white ones on the right). Incidentally, the thrusters are the same ones for the Fireball, strange, considering the Neuspotter is a Strahl unit. But don't think too much for Ma.K!

Cut off the attachments and stick them to the Snake Eye's, I feel so proud of myself :)


Next, the most difficult part IMHO, the anti-gravity units.
All of us Ma.K fanatics know that they are actually made up of 2 Star Wars AT-AT necks (ERTL/AMT kit)
Sanding nightmare!

I used a combination of needle file, pin vise, back of my modeling knife, and some 600 sand paper to get rid of the major seamline running full length along the part. A tiny bit of putty for where there are holes.
The brush is for clearing the dust so that I can see if I sanded enough.

Test fit. After 1 hr of sanding, I've only finished one side of the anti-gravity unit...


That's all tonight folks, good night!

Neuspotter Started!

While I study the weathering using oils and color modulation from the DVD maxwinamp passed me (thanks so much bro!), I decided to quickly carry on with the Neuspotter which I took out sometime back but got stuck. Started before I got really sick on Sunday...

This kit has the most wires and multimedia I've ever seen!
Even a light bulb is included, though no battery was found (there was one kit with a battery given inside, but I've sold that away.)
Its an old kit, 20+ years old, so the molding is nothing great to write about.
Lots of TLC is needed on each part, but I enjoyed the building process.
Pictures below...

Head unit

Upper body

Lower body

Place them all together now...

I am thinking of the standard tea/green color for this guy, and will try out color modulation on it. Hope to finish it by December for the small diorama meet-up at m-workshop.